表面增强型强化管外蒸发换热特性实验研究
DOI:
CSTR:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TK124

基金项目:


Experimental study on evaporation outside the surface enhanced tubes
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    介绍了表面增强型蒸发强化管,并对氟利昂制冷工质R22在该管外的沸腾换热进行了实验研究.实验通过对4根不同管型的蒸发强化管进行对比,分析了不同管型参数对管外换热系数的影响.得出结论:4根强化管的总传热系数随流速变化的趋势有所不同;1^#管和3^#管的总传热系数在实验流速范围内相差不大;4^#管的总传热系数随流速的变化曲线最为平坦;2^#管是4根管子中总传热系数随流速变化最大的一根管子.

    Abstract:

    The experimental study on the performance of nucleate boiling of R22 outside the surface enhanced evaporation tubes was conducted by use of four two-sides enhanced tubes with different geometries.The test results show that:four enhanced tubes different overall heat transfer coefficients;the overall heat transfer coefficients increase with the increasing heat flux;among the fourenhanced tubes,the tube 2 and tube 4 have the best heat transfer capability.

    参考文献
    相似文献
    引证文献
引用本文

姜岗,马虎根.表面增强型强化管外蒸发换热特性实验研究[J].上海理工大学学报,2008,(5).

复制
分享
相关视频

文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期:
  • 出版日期:
文章二维码