混合通风参数对冬季地暖房间内甲醛去除和热舒适性的影响研究
CSTR:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

X 196

基金项目:

国家自然科学基金资助项目(42277477)


Effect of mixed ventilation parameters on formaldehyde removal and thermal comfort in underfloor heating rooms during winter
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    在地暖房间常需要采用新风系统来改善空气质量,新风系统送风参数的选择尤为重要。基于计算流体动力学数值模拟方法,探究混合通风的送风温度和送风角度对地暖房间甲醛去除效果和热舒适性的影响。研究中设定甲醛由办公桌释放,考虑送风角度(30°、60°、90°)和送风温度(10、15、20 ℃)的不同组合。基于模拟结果,分析房间内不同竖向截面和脚踝活动区域的气流速率、温度、预测平均评价?预测不满意百分比指标(predicted mean vote and predicted percentage of dissatisfied, PMV-PPD)和甲醛质量分数分布特征,并且计算头足温差和甲醛去除效果评价指标。研究结果表明:送风角度一定时,随着送风温度升高,地板温度和送风温度的温差减小,热浮力作用减弱,导致室内气流速率减小;送风温度一定时,送风角度影响新风流动路径,进而改变室内涡旋气流的分布;送风温度升高会使室内温度升高,室内温度分布与气流速率分布密切相关,高温区域常出现在气流低速区;头足温差计算结果,表明室内热舒适性符合一级满意度;PMV-PPD表明,在送风温度为20 ℃、送风角度为60°时,室内一级舒适区占比最多;在送风温度为15 ℃、送风角度为30°时甲醛去除效果最佳。

    Abstract:

    A fresh air supply system is often necessary in winter to enhance indoor air quality in underfloor heating rooms, making the selection of air supply parameters particularly important. Computational fluid dynamics simulations were employed to investigate the effects of supply air temperature and supply angle under mixed ventilation on the formaldehyde removal efficiency and indoor thermal comfort in an underfloor heating room. The study set the release of formaldehyde from the office desk, and different combinations of supply air angles (30°, 60°, 90°) and supply air temperatures (10, 15 and 20 °C) were considered. Based on the simulation results, distribution characteristics of air flow velocity, temperature, predicted average rating minus predicted dissatisfaction percentage indicator (predicted mean vote and predicted percentage of dissatisfied, PMV-PPD) and formaldehyde mass fraction on different vertical planes and in the ankle activity region were analyzed. Quantitative calculations of the head-to-foot temperature difference and formaldehyde removal efficiency indicators were also conducted. The research results indicate that when the supply air angle is constant, an increase in supply air temperature reduces the temperature difference between the floor and the supply air, the thermal buoyancy effect weakens, leading to a decrease in airflow velocity. When the supply air temperature is constant, the change in the supply air angle affect the flow path of the fresh air, thereby altering the distribution of vortex airflow. An increase in supply air temperature will increase the indoor temperature. The indoor temperature distribution is closely related to the air flow velocity distribution, high-temperature areas often occur in low-velocity air flow zones. The calculation of head-to-foot temperature difference indicates that the indoor thermal comfort meets the first-level satisfaction standard. The PMV-PPD indicates that when the supply air temperature is 20 °C and the supply air angle is 60°, the proportion of the first-level comfort zone in the indoor space is the largest. The best formaldehyde removal efficiency is achieved at a supply air temperature of 15 °C and a supply air angle of 30°.

    参考文献
    相似文献
    引证文献
引用本文

黄远东,徐智超,李彬,王子佳,罗杨,崔鹏义.混合通风参数对冬季地暖房间内甲醛去除和热舒适性的影响研究[J].上海理工大学学报,2026,48(5):618-628.

复制
分享
相关视频

文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2025-09-22
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2026-11-05
  • 出版日期:
文章二维码